Pages

Tuesday, December 31, 2013

ATLANTIK V2 PROVES TO BE A WINNER AMONG EXPERIENCED AQUARISTS

ATLANTIK V2 PROVES TO BE A WINNER AMONG EXPERIENCED AQUARISTS

The Atlantik V2 is the most unique LED system Orphek as ever produced.  It does not appear as bright as the V1 to the human eye but it is more intense in wavelengths needed for good coral growth.
  LED aquarium lighting
Our new UV/White LEDs are most interesting because they produce light in the wavelength between 360-430nm.

white UV 360-420nm-17000k
white UV 360-420nm-17000k


white UV 360-420nm 6500K
white UV 360-420nm 6500K

orphek white led 430-410nm 6500K

orphek white led 430-410nm 6500K
orphek white led 430-410nm 18000K
orphek white led 430-410nm 18000K

We have changed the LED layout in the V2 to further enhance the color of corals.  Corals that appear brown under standard lighting will take on a colorful appearance revealing green pigments present in the coral.  We had several experienced aquarists conduct experiments with all types of corals and the consensus was that all corals look excellent under the Atlantik V2 lighting.  Drab looking corals will now appear beautiful. Growth rate was also deemed to be excellent. Our new LED configuration is as follows:
Coral photo under Led aquarium lighting
Corals Under Atlantik v2
  • Channel 1 – UV/White LEDs
  • Channel 2 – Blue mix consisting of wide spectrum UV, 410, and 430nm LEDs
  • Channel 3 – White LEDs
  • Channel 4 – Red LEDs which can provide a very pleasing nighttime look when combined with Channel 2.
What makes the V2 stand out is how the corals reflect the light back to the viewer.  An understanding of this
can be found here.
 http://orphek.com/led/wp-content/uploads/2013/11/Orphek-Atlantik-V2-channel-1-


 Corals Aquarium LED light   corals LED aquarium lighting
Led aquarium lighting

Our new blue LEDs are also unique in that the blue is not as intense as our older 450nm because we combine these LEDs with our 410, 430, and 470nm LEDs to produce colors that have depth.  FireForest and Red Lobo’s look amazing under the V2.  Why, because the high range of the blue (490-510nm) reflect the light back and appear more red where 450nm would just show a lower level of the red pigment.  Our new Azurelight coral inspection light also produce similar results.

New wide blue LED

Orphek New Wide blue LED cyan with extra (490-510nm)
http://orphek.com/led/wp-content/uploads/2013/11/Atlantik-V2-channel-2-SPEC-1024x707.jpg

Channel 3 is the brightest appearing channel and intensity levels can easily be controlled with this channel.  Channel 4 also appears much better with the new LED layout.
By combining blue and red channels with channel 3 we can create a strong pink color if desired.  Our new arrangement allows better control and appearance of corals to give a more pastel look rather than a bright target look as in disco lighting.  Much more information on our design can be found here. http://orphek.com/in-depth-understanding-of-orphek-atlantik-v2-groundbreaking-technology/

No comments:

Post a Comment